Bjd doll

Righty well after taking her apart and taking away that nasty leather I popped in white felt instead ... so re strung her then thought I'd attack the knee joints in hopes of her being able to stand... I drilled 2 holes through the upper and lower parts of the joints then inserted a brass bar, so each section of leg is individually threaded hoping for a tighter joint ...also I popped in a brass bar across her hips in hopes of making the top of the legs more stable for standing... strung her up again but unfortunately she is going to be a sitting, laying or kneeling doll... she is just too heavy to stand ...I guess this happens often with ooak dolls made from heavy paperclay... am hoping to try doing some resin ones in the future so they being lighter shouldn't have the same problems!
Well I did buy her a nice wig from ebay last week and it arrived yesterday so this morning I have restrung her for the last time and have put the back of her head back on, got her wig on and have styled it with wee pigtails :o)) I'm thrilled with how she looks even though disappointed she'll not stand!

Well here's some pics... so wish my camera took better pics but it doesn't...


 

bjd strung!

Righty here she is all painted and strung... I was originally just going to knot the elastic at the top of her head and secure it beneath skin level then clay over to hide... but I chose a heavier elastic and being 8 ends it just wouldn't be able to secure properly... so this morning I gave her a bit of brain surgery and cut off the back if her head and then drilled a couple of hole and threaded a solid brass pipe ... this is what I secured the elastic too... good lot of knotting and before I attach the back of her head I'll pop some superglue on the knots so they wont come loose.... so the last problem will be the fact the black leather is leaving smudgy black marks... this will take a bit of puzzling .... any ideas?
Okay so here are the pics :o))


 
 

another bjd update

Wow guys I'm on a roll ... another update and not long between LOL
Here's a pic of the face painted ... unfortunately my camera is crap and it doesn't take great piccies ... I did one of the pics in gray scale which I love :o))... you'll note in the colour picture that there is some colour missing on the right eyelid... have fixed that LOL

 

Bjd doll skin paint

Right have to remember what I've done since I last posted an update....
Now I did find a couple of things that just didn't sit right after the last test stringing, 1 the right knee joint was not allowing the thigh and lower leg pieces to touch as they should when she's in standing position so rather than digging out the 2 pieces further to make the cups where the joint sits deeper I made that joint just a touch smaller...this worked great and isn't noticeable and I'd be the first to notice it and that would bother me LOL... so after I made that joint smaller I restrung again and found I still had some problems with the right leg... when she stood her right knee would bend...after looking and looking I found the lower right leg was about 2mm longer so she had to have that cut off... safe to say after restringing all was well so I then started painting her skin tone... ended up with a few more problems ..this time not with the doll herself but my mini compressor died ...which isn't surprising as Andrew my partner confessed to dropping it ... so out we went and got a new one which he paid for :o))... well got it home and set it up then found I didn't have the the wee connection needed to attach my air brush gun!! So had to go find one of those and instead found a nice wee new gun which was only $25.00 so was thrilled... got everything hooked up finally and what can I say but that wee cheap gun works better than my imported more costly one LOL

Right after blabbering on here are the pictures I've taken of her as she looks at present ... but I'm now going to sit down and give her some highlights and a bit more of a face... but before that I will clean up around her eyeballs just a bit as there is still a wee bit of paint I've not taken off yet. But once thats done she'll be ready for her last stringing ... Yay!!! :o))
So watch out for more piccies as I'm gonna go for gold and will work on her straight till she's done!

Any questions just ask :o))


 
 

Stuff I've been up to...

I've been making a few Christmas pressies lately... I've 2 finished so thought I'd show you all :o))
The first is Eeyore for Andrew's nephew Harper who is now 1 whole yr old... I will be doing another for him it's a Macaw hand puppet so will show piccies when I've done :o))
The second is a very cute Turtle for Andrew's Mum since she just loves Turtles...
Links... Turtle pattern click here.... Eeyore pattern click here

 
 
 


Now the last is an update on the Bjd dolls... I've added the eyes finally to the big one they are the diy eyes and couldn't have been more pleased with the results! So simple to just print out the coloured eye you like and place in the indent then snap the clear over the top!... made hands and feet... she's had numerous coatings of filler/primer and sanded sanded and sanded ... also I reshaped her knees and cut off some of her lower legs ... I think she's almost ready for proper painting and putting together... but will do a test stringing and see who she moves... might have to change the knees again but we will see :o))

 
Well thats it for now ... will update again soon :o))
Hugs,
Sharon



Unicorn Horn and wings

Well we are nearly there guys... this is the last part ...so post links to me if you want to show off your Unicorn!
Here's a pink one in the processes of being created... it's gonna look fantastic :o)) visit Sharon to see how she's going!

Lets get going... I'm going to start with the wings ... so here's a pic of what you'll need... please note I am using cernit but that's not a requirement ...you any polymer they will all turn out the same :o))


 next I've rolled out about half of the pkt of clay ... probably about 1-2mm thick..then I've cut 2 pieces of wire and folded them in half and twisted it folded side till it's about an inch long... then I cut the wire to the length I wanted by holding up to the side of my wee horse..
here's a pic of one piece of wire cut on top of the white rolled out clay...


once you've cut both the wing wire to match lay them on the clay making sure the twisted end is hanging over the edge of the clay... this this then end we will insert into the horse so needs to be as clay free as you can get it!... trim the clay so it's about 1/2cm away from the outer edge of the wire ... rub a little baby oil or liquid clay over the wire and overlap of clay... then fold that clay edge over the wire and press it down so that it's well attached to the clay... then slice down the middle of the wings .. like below...


Next give the wing some shape by cutting it like this...remember to make sure you have a pair ...we don;t want to have 2 lefts or rights!

Right with your knitting needle begin to press and drag it through the clay from the wire to the cut edge... press harder as you get toward the cut edge so that your tool goes through the clay all the way to the plate...my plate you can see in the picture is a tile I use for making then baking on.


Now after you've done that you should have something that looks a bit like mine here...


 

Once you have both wings done lift them off your surface as gently as you can ...we don;t want to rip them or pull the wire out...once you have lifted bend the wire into the pose you want ...then repeat on the other...they don't have to be exact so don;t try else you'll be at it all day and frankly I really love that mine don't match...makes for a more interesting piece!
Righty then place them on some fiber fill ready to be baked soon as we've done the horn...
For the horn all we do if take a small length of wire and twist it  to the top ...this only needs to be about an inch at the most so don't twist a huge length!... roll out a bit of clay to look a bit like a carrot then insert the wire into the carrot... now to finish it off I rolled out a very skinny piece of clay then wrapped it around sort of like a spiral ...



Next pop everything in the oven and bake as the direction tell you on the packet...
Okay when cooked and cooled it's time to decorate as you'd like... for me I brushed some glue over just the spirals of the horn and sprinkled with glitter... then because I'm a bit of a fire bug I lit a candle and just gently burned it just enough to take the brilliant white and cut down on the sparkle of the glitter... now I chose to do this as my wee guy has a lot of gray in him and the white was just too white ...for the wings I just burned them again just gently to take away the "white"!
For attachment use a needle tool or a doll needle and poke it into the place were the wing will be attached... wriggle it around and make sure it's wide enough to insert that wire on the wing... if the wire is too long trim it off so it's shorter but not too short as we want it to be firmly in there... when your happy with that use a drop or 2 of superglue on the end of the wire and also the bit of clay at the top of the wire... re-insert and hold till it's taken... then bend the wire to the angle you like... please don't try and bend the wings themselves else they will break!... repeat for the other wing and also for the horn...when your done you should have something like mine here :o))


 
 
Well we are all done... I hope you enjoyed and will send me some pics :o))

Hugs,
Sharon

Unicorn Lesson 4

Right lets get to finishing this guy...
Firstly we are going to add the long hair over the hooves and lower legs... so take a length of the fiber your using and measuring from about the knee down to the bottom of the hoof cut that from the length of fiber... do the same for each leg ...

Next using a good tacky glue brush some on the top of one of your cut pieces..


Now wrap this around the knee area... yep this is a messy job so do your best...
Do this for each of the legs but only the front of the leg that's bent...


 
Okay that done allow to semi dry... now before it's fully dry usually about 2-3min ..start to felt the top in where the glue is ... use you needle at the same angle I have here... this will help aid in avoiding your fingers... also remember to go in straight so you don't break your needles!


Once you have done that to all 4 of the legs we'll trim them a bit... note the direction of the scissors... if you trim off the bottom then when your feathering the hair always cut down the hair using just the tip of your scissors... remember to snip little by little we dont want to take chunks out just sort of layer it a bit... now if your happy with the layering stop there... if your not happy with the layering as its a bit thick on the bottom ...that is easy to correct by taking you scissors and snipping upward to thin it out a little... idealistically I aim for just a hint of hoof being visible through the hair... but again this is up to your taste :o))


Pic of all legs trimmed...


Okay... lets get to the mane etc...
But first lets highlight some bone areas... best way to describe it to you is have a look at the pictures... I've used a black pencil quite strongly here so you could see it clearly ...but you would do yours a bit lighter ...just a hint... so follow what I've done ...




Holding your piece of fiber in one hand pull a chunk of hair from the top... you don't need to much here just a small longish bit for his fringe...

Felt this piece between the ears..


 
Mane now... using the techniques as above pull out a couple of lengths of fiber and spread it out as I've done here... please note you dont need a thick amount as it will be folded...

now if your making a big Unicorn then hold your fiber lengths up to your horse to see if you like the length.... if you do then choose what side you would like the mane to fall and felt the ends down on the opposite side... fold over and finish as for the folded mane...


Place this over the neck like here and felt it up the center very well...


 
Now play around by folding it over on each side to decide which side you like ...once you've decided which side you like hold it in place but don't pull ..you want it to be a bit puffy and not flat...have a look at the pic to see what I mean...

Next well attach it down just gently to keep it sitting on the side... note were my needle is in the next picture then just gently felt across the neck... only a few stabs with the needle as we don't want to flatten it or have a line there...


Tail... I've pulled out a length of fiber ... then I've folded the top down just a bit and stabbed the needle around to hold it in place... I did this as the top of the tail needs a bit more thickness to it...


Attach the tail by needle felting around the ball you made at the top of the tail...


Okay as you can see in the above picture his tail is just not long enough... so I pulled another piece of fiber, lifted his tail and felted it in just a bit lower down... now yes I know this isn't a pretty picture but it needed doing!


Looking much better now :o))


 
 
Right that's the horse part done... now lets turn him into something a bit more mystical :o)) ... With the length of this post I will put it up on another post ... and you wont have to wait long as I'm going to do that right now!